Navigator Suite - Catalog

2022-2023
Course Outlines
Career and Technical
Welding

Print Page

Welding

Active as of Fall Semester 2010

General Information
Transfer & Articulation
Course Purpose
Learning Outcomes
Topical Outline
Print Friendly

I. General Information

1. Course Title:
Advanced Welding Process

2. Course Prefix & Number:
WELD 1130

3. Course Credits and Contact Hours:

Credits: 4

Lecture Hours: 1

Lab Hours: 6

4. Course Description:

Enhanced GMAW and GTAW will be performed on non-ferrous, ferrous, and stainless steel in this course. Casting repair, pressure vessel welding and testing are also performed.

5. Placement Tests Required:

6. Prerequisite Courses:

WELD 1130 - Advanced Welding Process

All Credit(s) from the following...

Course Code	Course Title	Credits
WELD 1101	Shielded Metal Arc Welding	4 cr.
WELD 1117	Gas Metal ARC Welding	3 cr.

Filter table:

9. Co-requisite Courses:

WELD 1130 - Advanced Welding Process

There are no corequisites for this course.

II. Transfer and Articulation

III. Course Purpose

Program-Applicable Courses – This course is required for the following program(s):

Name of Program(s)	Program Type
Welding	Diploma
Welding	AAS

IV. Learning Outcomes

1. College-Wide Outcomes

College-Wide Outcomes/Competencies	Students will be able to:
Analyze and follow a sequence of operations	Apply appropriate welding process to selected base metal.
Apply abstract ideas to concrete situations	Develop procedures for welding cast iron
Utilize appropriate technology	Construct fixture for welding hardface material.

2. Course Specific Outcomes - Students will be able to achieve the following measurable goals upon completion of the course:

Expected Outcome	MnTC Goal Area
Weld non ferrous metal with appropriate technology.
Weld pressure vessel quality weldments for pressure testing.
Weld Pipe welds for testing.

V. Topical Outline

Listed below are major areas of content typically covered in this course.

1. Lecture Sessions

I. Equipment setup and selection for advanced welds with SMAW

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

II. Equipment setup and selection for advanced welds with GMAW

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

III. Equipment setup and selection for advanced welds with OAW.

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

IV. Equipment setup and selection for advanced welds with GTAW.

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

2. Laboratory/Studio Sessions

I. Perform the following welds with SMAW process.

A. Weld nickel rod on gray cast iron SMAW

B. Hard surfacing mild steel SMAW

C. Weld 2-F lap joint stainless steel SMAW

D. Weld 2-F tee joint stainless steel SM W

E. Weld 3-F lap joint stainless, up or down SMAW

F. Weld 4" pipe to plate 2-F 3 passes with E- 7018

G. Weld 4" pipe to plate 3-F 3 passes with E-7018

H. Weld 4" pipe to pipe 2- F 3 passes with E- 7018

I. Weld a vessel for pressure testing SMAW

II. Perform the following welds with GMAW process.

A.Weld stringers on aluminum GMAW

B. Weld stringers on stainless GMAW

C.Weld a I-G stainless weldment on light material GMAW

D. Weld a 1-G stainless weldment on heavy material GMAW

E. Weld a 1-G butt joint stainless steel GMAW

F. Weld a 3-G stainless weldment GMAW

G. Weld a 1-F aluminum weldment GMAW

H. Weld a I-G aluminum weldment GMAW

I. Weld a 2-F aluminum tee weldment GMAW

J. Weld a 3-F aluminum tee weldment GMAW

K. Weld 3-G aluminum joint GMAW

L. Weld 4-F aluminum tee joint GMAW

M. weld 1-Gstainless steellf4" 2 pass GMAW

N. Weld stainless steel3-F lap GMAW

O. Weld stainless steel 3-F tee GMAW

P. Weld a 4-G stainless weldment GMAW

III. Perform the following welds with OAW process.

A. Braze gray cast iron OAW

B. Repair gray cast iron, open

C. Silver braze on copper OAW

D. Silver braze copper tube to mild steel OAW

E. Weld pipe to pipe in 5-G position OAW

F. Weld pipe to pipe in 6-G position OAW

G. Flame hardening OAW

IV. Perfrom the following welds with GTAW process

A. Weld steel box and pressure test GTAW

B. Weld aluminum box and pressure test GTAW

C. Weld pipe to plate flat position steel GTAW

D. Weld pipe to plate flat position aluminum GTAW

I. General Information

1. Course Title:
Advanced Welding Process

2. Course Prefix & Number:
WELD 1130

3. Course Credits and Contact Hours:

Credits: 4

Lecture Hours: 1

Lab Hours: 6

4. Course Description:

Enhanced GMAW and GTAW will be performed on non-ferrous, ferrous, and stainless steel in this course. Casting repair, pressure vessel welding and testing are also performed.

5. Placement Tests Required:

6. Prerequisite Courses:

WELD 1130 - Advanced Welding Process

All Credit(s) from the following...

Course Code	Course Title	Credits
WELD 1101	Shielded Metal Arc Welding	4 cr.
WELD 1117	Gas Metal ARC Welding	3 cr.

Filter table:

9. Co-requisite Courses:

WELD 1130 - Advanced Welding Process

There are no corequisites for this course.

II. Transfer and Articulation

III. Course Purpose

1. Program-Applicable Courses – This course is required for the following program(s):

Name of Program(s)	Program Type
Welding	Diploma
Welding	AAS

IV. Learning Outcomes

1. College-Wide Outcomes

College-Wide Outcomes/Competencies	Students will be able to:
Analyze and follow a sequence of operations	Apply appropriate welding process to selected base metal.
Apply abstract ideas to concrete situations	Develop procedures for welding cast iron
Utilize appropriate technology	Construct fixture for welding hardface material.

2. Course Specific Outcomes - Students will be able to achieve the following measurable goals upon completion of the course:

Expected Outcome	MnTC Goal Area
Weld non ferrous metal with appropriate technology.
Weld pressure vessel quality weldments for pressure testing.
Weld Pipe welds for testing.

V. Topical Outline

Listed below are major areas of content typically covered in this course.

1. Lecture Sessions

I. Equipment setup and selection for advanced welds with SMAW

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

II. Equipment setup and selection for advanced welds with GMAW

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

III. Equipment setup and selection for advanced welds with OAW.

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

IV. Equipment setup and selection for advanced welds with GTAW.

A. Procedures for welding cast iron.

B. Procedures for welding hardface amterial.

C. Procedures for pipe welding.

2. Laboratory/Studio Sessions

I. Perform the following welds with SMAW process.

A. Weld nickel rod on gray cast iron SMAW

B. Hard surfacing mild steel SMAW

C. Weld 2-F lap joint stainless steel SMAW

D. Weld 2-F tee joint stainless steel SM W

E. Weld 3-F lap joint stainless, up or down SMAW

F. Weld 4" pipe to plate 2-F 3 passes with E- 7018

G. Weld 4" pipe to plate 3-F 3 passes with E-7018

H. Weld 4" pipe to pipe 2- F 3 passes with E- 7018

I. Weld a vessel for pressure testing SMAW

II. Perform the following welds with GMAW process.

A.Weld stringers on aluminum GMAW

B. Weld stringers on stainless GMAW

C.Weld a I-G stainless weldment on light material GMAW

D. Weld a 1-G stainless weldment on heavy material GMAW

E. Weld a 1-G butt joint stainless steel GMAW

F. Weld a 3-G stainless weldment GMAW

G. Weld a 1-F aluminum weldment GMAW

H. Weld a I-G aluminum weldment GMAW

I. Weld a 2-F aluminum tee weldment GMAW

J. Weld a 3-F aluminum tee weldment GMAW

K. Weld 3-G aluminum joint GMAW

L. Weld 4-F aluminum tee joint GMAW

M. weld 1-Gstainless steellf4" 2 pass GMAW

N. Weld stainless steel3-F lap GMAW

O. Weld stainless steel 3-F tee GMAW

P. Weld a 4-G stainless weldment GMAW

III. Perform the following welds with OAW process.

A. Braze gray cast iron OAW

B. Repair gray cast iron, open

C. Silver braze on copper OAW

D. Silver braze copper tube to mild steel OAW

E. Weld pipe to pipe in 5-G position OAW

F. Weld pipe to pipe in 6-G position OAW

G. Flame hardening OAW

IV. Perfrom the following welds with GTAW process

A. Weld steel box and pressure test GTAW

B. Weld aluminum box and pressure test GTAW

C. Weld pipe to plate flat position steel GTAW

D. Weld pipe to plate flat position aluminum GTAW