I. Perform the following welds with SMAW process.
A. Weld nickel rod on gray cast iron SMAW
B. Hard surfacing mild steel SMAW
C. Weld 2-F lap joint stainless steel SMAW
D. Weld 2-F tee joint stainless steel SM W
E. Weld 3-F lap joint stainless, up or down SMAW
F. Weld 4" pipe to plate 2-F 3 passes with E- 7018
G. Weld 4" pipe to plate 3-F 3 passes with E-7018
H. Weld 4" pipe to pipe 2- F 3 passes with E- 7018
I. Weld a vessel for pressure testing SMAW
II. Perform the following welds with GMAW process.
A.Weld stringers on aluminum GMAW
B. Weld stringers on stainless GMAW
C.Weld a I-G stainless weldment on light material GMAW
D. Weld a 1-G stainless weldment on heavy material GMAW
E. Weld a 1-G butt joint stainless steel GMAW
F. Weld a 3-G stainless weldment GMAW
G. Weld a 1-F aluminum weldment GMAW
H. Weld a I-G aluminum weldment GMAW
I. Weld a 2-F aluminum tee weldment GMAW
J. Weld a 3-F aluminum tee weldment GMAW
K. Weld 3-G aluminum joint GMAW
L. Weld 4-F aluminum tee joint GMAW
M. weld 1-Gstainless steellf4" 2 pass GMAW
N. Weld stainless steel3-F lap GMAW
O. Weld stainless steel 3-F tee GMAW
P. Weld a 4-G stainless weldment GMAW
III. Perform the following welds with OAW process.
A. Braze gray cast iron OAW
B. Repair gray cast iron, open
C. Silver braze on copper OAW
D. Silver braze copper tube to mild steel OAW
E. Weld pipe to pipe in 5-G position OAW
F. Weld pipe to pipe in 6-G position OAW
G. Flame hardening OAW
IV. Perfrom the following welds with GTAW process
A. Weld steel box and pressure test GTAW
B. Weld aluminum box and pressure test GTAW
C. Weld pipe to plate flat position steel GTAW
D. Weld pipe to plate flat position aluminum GTAW
|